Bottom of push rod from 2.5 HP
Top of push rod from 2.5 HP
Casting that bottom of push rod goes into. Roller rides on cam. Grove is for end of screw that keeps in in line.
Bolt that keeps rocker arm in place.
Water pump on 2.5 HP
2.5 HP
Timer and push rod assembly from 2.5 HP
2.5 HP
Crank from 2.5 HP
2.5 HP water pump
Water pump and output shaft of 2.5 HP
Oilers on 2.5 HP
Rear of 2.5 HP
2.5 HP. Schebler Mixer
2.5 HP Front of engine
2.5 HP. Rocker arm and it's support are not installed when this picture was taken.
Connecting rod from 6 HP engine. Wrist pin end.
2.5 HP engine. Oiler on the right is a Detroit Lubricator Co.
4 HP engine
4 HP rear of engine
4 HP rear of engine.
4 HP timerand push rod assembly
Bronze rocker arm from 2.5 HP up-side-down
Bronze rocker arm from 2.5 HP
12 HP transmission
12 HP water pump
12 HP Water Pump
12 HP
12 HP transmission
12 HP water pump drive
Original Clarke engine muffler
Clarke engine muffler
Clarke Muffler
Clarke muffler made of cast iron.
