page32

CAST IRON ENGINE PULLEYS.

Belt pulleys for transmitting power from the engine to the machine or line shaft should be of a certain size on each engine to give the best results. The pulleys furnished on the engine are standard and should not be changed unless absolutely necessary. High speed work, such a, feed grinding wood sawing, driving an emery etc., requires a large pulley to get the necessary speed. In such cases a large pulley should be used. If you are not sure as to the size pulley to use, send in your order just the same, tell us what you want to do and we will see that you get the right size. Shipped from factory at EVANSVILLE, IND.

No. 47E330 Cast Iron Engine Pulleys.

Size, Inches Price Size, Inches Price Size, Inches Price

    4x4 $0.95        6x6 $1.30                         14 x8 $3.90

    6x4 1.00          8x6 1.70                            1 6x8   4.50

    8x4 1.10        1 0x6 2.15                          18x8    5.00

    1 Ox4 1.20      12x6 2.50                          20x8 5.60

    12x4 1.70       14x6 3.00                           22 x 8 6.15

    14x4 2.00      16X6 3.40                           24x8 6.80

    16x4 2.25      1 8x 6 3.80                         26x8 7.30

    18x4 2.50      20x6 4.20                           28X8 7.85

    22x6 4.65     3OX8 8.40

    24x6 5.10

    26x6 5.50

It is not advisable to use a pulley any larger than 12x4-inch on the 11/2 horse power; 16x4-inch on the 2 1/2-hor e power; 20x4-inch on t 5-horse power 26x6-inch on the 7-horse power, 30x8-inch oil the 9 and 12-horse power.

-32-